Clutch Module Stage 2 (240mm) für Opel/Vauxhall 1,4T 16V with M32 gearbox
product properties
Product number: | 10.600.023 |
---|---|
Manufacturer: | Opel / Vauxhall |
Model: | Adam, Astra J, Astra K, Cascada, Corsa E, Insignia A, Meriva B, Mokka X, Zafira C Tourer |
Engine: | 1,4 74 kW (B14NEJ), 1,4 81kW (B14XNT) Erdgas, 1,4 88 kW (A14NEL), 1,4 103 kW (A14NET), 1,4 103 kW (B14NET), 1,4 110 kW (B14NEH), 1,4 110 kW (B14XFT) |
Clutch Module Stage 2 (240mm) für Opel/Vauxhall
1,4T 16V with M32 gearbox
Adam 1,4 B14NEH
Astra J 1,4 A14NEL , A14NET
Astra K 1,4 B14XFL,B14XFT , B14XNT
Cascada 1,4 A14NEL,
Corsa E 1,4 B14NEJ , B14NEH
Insignia A 1,4 A14NET, B14NET
Meriva B 1,4 A14NEL, A14NET
Mokka X 1,4 B14NET, A14NET
Zafira Tourer 1,4 A14NEL, A14NET, B14NET
until 450Nm
This kit contains:
- 240mm conversion single Mass lightweight Flywheel,
- Organic Centre Plate,
- 240mm Cover Plate,
- GM flywheel to crank bolts
- Release bearing
picture shown are for illustration purpose only!
Due to the considerable increase in performance, namely torque
which can be achieved through performance upgrades you may go beyond the
torque capacity of the OE clutch setup, causing the clutch to slip.
We have developed a single mass 240mm upgrade flywheel, specific for
the Corsa VXR, which upgrades from the stock 215mm diameter dual mass
flywheel. Even though our flywheel is larger, stronger and more reliable
than the stock flywheel, the mass is greatly reduced by 55% compared to
the stock flywheel. For maximum clutch performance the billet material
was carefully chosen, a flat and true surface on the flywheel for
maximum performance and smooth engagement. All topped off with balancing
to minute tolerances.
The kit include lower mass over stock.
Reducing parasitic losses (increasing torque and horsepower) at a
constant rate (as the revs climb, the losses grow at an exponential
rate). Due to the greatly reduced losses and a lower moment mass of
inertia these kits allow for maximum acceleration of the engine (faster
revving, higher response, more power and torque) as well as shorter
shift times alongside sportier shifts.
The clutch kit consists
of our Organic Centre Plate which allows for smooth engagement of the
clutch, similar to an OE feel with a higher torque capacity. The clutch
cover is a Genuine GM Astra VXR Cover Plate which was chosen due to its
OE reliability and higher torque capacity.
The kit includes 240mm
Conversion Single Mass Lightweight Flywheel, Organic Centre Plate,
Cover Plate, Flywheel to Crank Bolts & Release Bearing. Everything
you need to upgrade your clutch module!
(please take
note, when converting from the original dual mass flywheel to a single
mass performance alternative, some vibration often termed as "chatter"
can be felt at low RPM also at idle in neutral)