Throttle body kit for BMW E36 / E34 2,0-2,8 24V M50/M52/S52
product properties
Product number: | 10.010.017-45 |
---|---|
Manufacturer: | BMW |
Model: | 3er, 5er, 320i E36 2,0l, 323i E36 2,5l, 328i E36 2,8l, 520i E34 2,0l, 523i E34, 528i E34, M3 |
Engine: | M50, M50B25, M50B25TÜ, S52B32 |
Application: | Street |
All throttle body kits are pre-mounted and ready to be installed. The kit contains fitting instructions, throttle bodies, intake manifold, airbox, throttle control linkage and all necessary small parts.
After conversion an adjustment of the engine management is required. This isn´t including in price .
The price for this is:
Art.Nr 00.102.010 320i E36 + E46 , Z3 , 520i E34 + E392,0 110kW
Art.Nr 00.102.042 320i E46 , Z3 , 520i E39 , Z4 2,2 125kW
Art.Nr 00.102.011 323i E36 + E46 , 323ti , 523 E39 2,5 125kW
Art.Nr 00.102.017 328i E36 + E46 , 528i E39 , 728i E38 , Z3 2,8 142kW
The specified performance enhancing refers to standard engines with throttle body kit and adjustment of the engine management.
All individual throttle systems are pre-assembled ready for installation.
Kit includes:
- Installation instructions
- 3 x 45 mm throttle body parts(optionally 48mm or 50mm for an extra charge)
- Intake manifold
- air manifold
- one throttle control
- Lever
- Potentiometer mount
- all necessary small parts.
suitable for the following engines:
M50B20 | 520i E34 |
320i E36 | |
M50B20TU | 520i E34 |
320i E36 | |
M50B25 | 525i E34 |
325i E36 | |
M50B25TU | 525i E34 |
325i E36 | |
S50B30 / US Version | M3 E36 |
M52B20 | 320i E36 |
520i E39 | |
M52B25 | 323i E36 |
323ti E36 | |
523i E39 | |
M52B28 | 328i E36 |
528i E39 | |
728i / 728iL E38 | |
Z3 2.8 | |
Land Rover Defender (nur Südafrika) als Defender 90, 110 ,130 | |
S52B32 / US | M3 (US) E36 |
M3 (US) E36 | |
M3 (US) E36 |
• Simple assembly
• Emission regulations are maintained
• High quality aliminium components
• Sporty modern design
• The engine does not have to be opened
• Life span is not shortened
• System is ready for installation
The multi throttle body intake systems produced by our company is the successor of our double carburetor kits.
As is the case for the double carburetor kits the objective here is also the optimum artificial respiration of the engine.
For this reason, instead of the central throttle valve used for the sucking of all cylinders in the conventional intake systems, this system only has one throttle valve for each cylinder.
In combination with one injection valve per cylinder, this system offers optimum filling of cylinders throughout the whole speed range of the engine.
Another advantage of the dbilas dynamic multi-throttle body intake systems is that it offers the possibility of using "sharper" camshafts without negative influence on the smoothness of running. Only this method allows aspirating engines to achieve high liter performance.
Due to the same suction pipe length and simultaneously the same data a better mixture of the fuel and the asprated air is provided. Consequently the combustion is more efficient which results in an improvement of the fuel consumption in some operation areas.
A characteristic feature of our multi-throttle body intake systems is that not only the pollution classification of the vehicle is maintained but also the good running culture according to standard.
These characteristics remain unchanged, since all electronic sensors and actuators such as injection valves, air flow sensors or meters, throttle switches and idle control valves continue to be used in the systems.